the dirtbike is a 125cc Giovanni 4 stroke engine , method of starting is kick start i dnt know the year. I want to know how to put in headlights, taillights and brake lights. If its Possible what type of lights would i need to buy and what will i need to do to install the lights if u need to look at the bike first here is a link of the bike and its informationhttp://www.giovannibikes.com/Dirt-Bikes-...
How to install head %26amp;tail lights on a dirtbike?
you will need the lights, mounting stalks, wiring harness, and some power source like a battery and charging system etc. I would find a wrecking yard that specializes in motorcycles and buy all of the parts from a used dual purpose bike (you can look to see if they will fit) and then when you remove them just reverse the procedure on the other bike. If you want to make it road legal then you will want to look into those requirements as well.
How to install head %26amp;tail lights on a dirtbike?
Lots of stuffing around.
You would need to fit a battery first off.
You would then need to fit the headlight and taillight. You can use aftermarket ones, and large plastic companies like Acerbis make front headlights and generic taillights.
You will then need to wire the headlight to a switchblock, and from there, into a relay, and onto the battery, same with the taillight, however, to operate them you will need to turn them on and off with a switch and you will need to continually charge the battery, as I dont believe the bikes electricals will cope with a battery, and lights.
The easier option is to buy a pushbike rear LED light and bolt it to the rear fender, and buy 2 pushbike headlights, which are battery powered and connect them to the handlebars or the front forks.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment